Funded projects
Tradeflex Kft. supported developments and grant-funded projects.
Grant-funded projects
This page reproduces the textual content of the current Tradeflex.hu funded-projects page locally, without embedding an external website.
VEKOP-5.1.1-5-1-2-16-2018-00123 – Comprehensive energy-efficiency upgrade of Tradeflex Kft.’s Cziráki Street site in Budapest
Beneficiary: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
Project title: Comprehensive energy-efficiency upgrade of Tradeflex Kft.’s Cziráki Street site in Budapest
Project ID: VEKOP-5.1.1-5-1-2-16-2018-00123
Actual project start date: 2020.06.19
Actual project completion date: 2021.11.30
End of project sustainability period: 2025.09.16
Amount of non-repayable grant: 40 996 172 Ft
Grant intensity (%): 37,04198%
Amount of repayable support: 49 760 744 Ft
Repayable support intensity (%): 44,96110%
Project summary:
The purpose of the investment financed from the grant was to improve the energy efficiency of our Cziráki Street facility, which houses the design and manufacturing processes at the core of our business, and to radically reduce its annual energy demand—bringing heating energy demand close to zero—through renewable energy sources, specifically by introducing a heat-pump system to cover heating requirements.
The development significantly improved our position not only in terms of fixed operating costs—and therefore competitiveness—but the modern heating centre also created substantially better working conditions and comfort for our employees, contributing to higher productivity and morale.
Following the upgrade, the entire building achieved energy class A; in addition to the substantial energy savings, employee well-being and productivity also improved.
Unfortunately, implementation of the project was significantly complicated by the pandemic and its direct and indirect effects.
During the long period between project planning and completion, market conditions changed significantly and, unfortunately, unfavourably. As a result, total project costs increased, and in addition to the HUF 110 million eligible under the grant and loan, we provided a further HUF 29 million for implementation.
We are, however, fully satisfied with the result and, overall, the upgrades were well worth carrying out.
Project results:
The project successfully delivered thermal and waterproof insulation of the flat roof, a thermal-insulation rendering system on the façade walls, replacement of the planned doors and windows, and installation of the heat-pump system.
In addition to our genuine commitment to environmentally conscious, sustainable and innovative development (see, for example, our projects), the cost savings achieved through more energy-efficient operations also significantly help mitigate the disadvantages arising from a deteriorating market environment.
VP3-4.2.1-4.2.2-2-21 – Establishment of a brewery at a Tradeflex Kft. site
Beneficiary: TRADEFLEX Kereskedelmi és Szolgáltató Kft.
Call for proposals, title and code: Comprehensive development of food-industry plants, VP3-4.2.1-4.2.2-2-21
Project title: Establishment of a brewery at a Tradeflex Kft. site
Project ID: 3314834192
Contracted grant amount: 140.734.285 Ft
Grant intensity: 50%
Brief description of the project:
The project aims to establish a brewery at Tradeflex Kft.’s site at 2 Rákóczi Street, Balatonföldvár, by converting the existing building and purchasing the technological equipment required for production.
Through the investment we intend to develop our 1105’08 beer-production activity. The planned brewery will be located in an old railway gatekeeper’s house near Balatonföldvár railway station. Renovating the currently unused building will both provide a home for a production facility and give a new function to a historic building that may also serve as a tourist attraction.
The development is intended to produce high-quality craft beer. We plan to sell it in 30-litre kegs to hospitality venues and festivals, and in 0.5-litre aluminium cans through wholesale and retail chains.
Because the beer is unfiltered, its nutritional profile will include a high vitamin and trace-element content from the yeast, complemented by the high antioxidant content of special malts made from Hungarian grain.
In addition to the construction work required for the plant, modern production equipment will be purchased: a brewery production line, water-treatment unit, washing/filling equipment, density meter, canning machine and labelling equipment. With the completed system and optimal operation, two 1,000-litre brews can be produced per day, with annual output between 297,000 and 310,000 litres.
The investment also includes the purchase of an electric cargo van and a 50 kW solar-power system.
In line with the objectives of the call, the project uses modern and environmentally friendly technologies to implement a development that improves corporate efficiency in food processing while also contributing to meeting food demand from domestic sources.
Planned project completion date: 2024.02.29.
PROJECT PROGRESS
Construction work on the brewery building is now nearing completion. The existing building has been converted to accommodate the production line and comply with food-industry requirements. Energy-efficiency improvements were also implemented, including façade insulation and modern thermally insulated doors and windows.
Landscaping around the building has been completed, accessibility and site protection have been improved, the immediate surroundings have been paved for storage and loading, and the property has been fenced. The required mechanical and construction works inside the building are complete, including installation of the water network and sanitary facilities, while a heat-pump system now provides heating and cooling.
As a final step, the upgrade of the building’s electrical network is nearing completion.
In parallel with the construction and conversion works, a number of the planned modern technological machines and equipment have also been purchased.
Once the brewery starts operating, we will produce a beer range designed both for traditional beer enthusiasts and for consumers seeking new flavours, with excellent composition and taste. The core range will consist of three beers: a classic lager, a wheat beer and an IPA.
After completion of the project, all products of the Helka beer brand owned by the group will be produced at Tradeflex Kft.’s brewery established in Balatonföldvár as a result of the project.
Update 17 March 2025:
The technical scope of the project was successfully completed in June 2024. Due to delays in the electricity provider’s approval of feed-in from the solar system, we requested an extension of the project until 31 December 2024. Unfortunately, the utility could not meet this date, so the solar-system settlement carried over into early 2025.
According to the received report, the relevant date was 14 February 2025, but the signed and approved document was only received from the contractor on 10 March 2025. We therefore submitted the project settlement and final report to the funding authority on 14 March 2025.
With this, all obligations undertaken in the grant project have been fulfilled, the project has achieved its objective, and the plant has started production.
GINOP PLUSZ-2.1.1-21-2022-00109 – Development of the “OptiMed” smart device primarily for pulmonology, medical diagnostics and therapeutic purposes
BENEFICIARY: TRADEFLEX Kft.
IMPLEMENTATION LOCATION: 8600 Siófok, Csárdaréti út 3/B
CONTRACTED GRANT AMOUNT: 249.990.601 Ft
OF WHICH EUROPEAN UNION FUNDING: 219.991.726 Ft
GRANT INTENSITY (%): 55 %
Project start: 2022.07.01.
Project completion: 2025.04.26.
PROJECT DESCRIPTION:
The project aims to research and develop an integrated measurement-device, decision-support and service system that assists physicians in everyday diagnostics in selecting a personalized inhalation device for COPD/asthma patients and in rapidly developing therapy with near-optimal or optimal effectiveness.
The type of active ingredient is selected according to well-defined protocols, but a given active-ingredient category may include several substances with different characteristics, marketed by manufacturers in different inhalers. As a result, different drug-device combinations deliver different quantities of medication to the target area. Selecting the optimal inhaler–active-ingredient combination is therefore a major challenge and is currently performed empirically based on previous experience, sometimes requiring several medication changes.
The OptiMed system at the centre of the project will not only support physicians in selecting therapy based on measured results and a scientifically validated deposition model developed during the project, but will also support patients through a patient device with monitoring and training functions.
In summary, the development provides a personalized solution for optimizing delivery of the active ingredient to the lungs. Its direct beneficiaries are patients, physicians and pharmaceutical manufacturers, while society and the economy also benefit indirectly because respiratory diseases account for a significant share of lost working time in Europe.
The project was implemented with the support of the European Union and co-financing from the Hungarian State.
GINOP-1.2.15-21-2021-00022 – Production of a digital stethoscope for rapid recognition of pneumonia symptoms in COVID patients
BENEFICIARY: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
IMPLEMENTATION LOCATION: 8600 Siófok, Csárdaréti út 3/B
CONTRACTED GRANT AMOUNT: 253 671 754 Ft
GRANT INTENSITY (%): 80 %
Project start 2021.08.27.
Project completed 2021.12.07.
Total project cost: 317 089 693 Ft.
INTERMEDIATE BODY: Ministry for National Economy – Deputy State Secretariat responsible for the implementation of economic development programmes
PROJECT DESCRIPTION:
Under the grant, we purchased information-technology, manufacturing and logistics equipment to produce a product suitable for daily diagnostic use based on the digital stethoscope prototype developed by Bremotech Kft. in 2020. Using the digital stethoscope, physicians can examine symptoms of pneumonia—primarily those resulting from COVID—while minimizing the risk of infection.
In everyday diagnostics, use of the product can also partially replace costly X-ray and CT examinations, which, when performed repeatedly, expose patients to significant radiation.
GINOP-1.2.8-20-2020-00829 – Comprehensive development of Tradeflex Kft.’s Siófok site
BENEFICIARY: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
IMPLEMENTATION LOCATION: 8600 Siófok, Csárdaréti út 3/B
CONTRACTED GRANT AMOUNT: 37 309 877 Ft
GRANT INTENSITY (%): 70 %
PROJECT COMPLETED: 2021.04.30
TOTAL PROJECT COST: 53 299 825 Ft
INTERMEDIATE BODY: Ministry for National Economy – Deputy State Secretariat responsible for Economic Development Programmes
PROJECT DESCRIPTION:
The project included the purchase of:
- An ALD 7720S i3D 5Mp in-line AOI high-speed camera with telecentric lens for efficient quality inspection, enabling rapid optical detection of defects in PCBs and their assembled components with high detection accuracy.
- TAGARNO FHD ZIP, a controllable high-resolution optical magnification system.
- Classic workbench 1500 × 700 mm workstations (assembly benches) with integrated elements.
- 12.5-litre ultrasonic cleaning unit with built-in heating.
- Basket for the cleaning unit.
- Semi-automatic BGA rework station with camera positioning.
With these tools, our Siófok site can now perform continuous and rapid quality inspections on products. Without such inspections, the products could not be delivered to our partners at all, or defects could lead to substantial additional costs and/or loss of business reputation.
Another key element of the project was the external and internal renovation of the building, including:
- Roof insulation with 12 cm PUR-core sandwich panels,
- Façade thermal insulation with 15 cm EPS boards, glass mesh and Dryvit finish,
- Replacement of doors and windows (14 units),
- Replacement of the gate with an SPU 42 sectional industrial door.
The project also included the purchase of working-capital items for production: PCBs and electronic components (semiconductors and passive SMD components).
GINOP-1.2.11-20-2020-00055 Establishment of a new automated manufacturing plant for inverters and solar charge controllers
BENEFICIARY: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
IMPLEMENTATION LOCATION: 8600 Siófok, Csárdaréti út 3/B
CONTRACTED GRANT AMOUNT: 391 298 950 Ft Ft
GRANT INTENSITY (%): 50 %
Project completed: 2022.08.30.
Total project cost: 782 597 900 Ft
INTERMEDIATE BODY: Ministry for National Economy – Deputy State Secretariat responsible for Economic Development Programmes
PROJECT DESCRIPTION:
The project aims to establish a highly automated electronics production unit in our Siófok manufacturing hall, operating according to Industry 4.0 principles and suitable as a model plant. It includes the production line, process control, final inspection, implementation and certification of quality-management (ISO 9001) and environmental-management (ISO 14001) systems, and the required construction works. In addition, one forklift will be purchased for production-logistics tasks, and
the architectural design expert fee is also planned as an eligible cost. The project creates the conditions required to manufacture, in series of tens of thousands, the high-quality modern sine-wave inverter and solar charge-controller product families resulting from our own research and development activities.
The development will expand our product range. An automated production system will be created, building fully automated, IoT-enabled production equipment fitted with sensors and cameras into an automated electronics manufacturing line: one SIPLACE CP14 and one SIPLACE CP12 PP placement machine for miniature as well as occasionally still-used medium/large components, one SAKI BF-3Di-LS2-L 3D Single-Lane AOI and one SAKI BF-3Si-LS2-L 3D Inline SPI optical inspection system, and
the purchase of a final-inspection system for carrying out functional tests.
In line with Industry 4.0, the development includes a manufacturing-support module: the placement machine monitors consumption of the components to be placed and automatically sends replenishment orders to the automated storage system. One electric forklift will be purchased for logistics. Building conversion: a complete refurbishment of a 394 m² hall is planned, creating a modern electronics manufacturing plant with high production capacity and near-zero energy demand under appropriate sunlight and with charged energy-storage cells/batteries.
During the hall conversion, the project seeks to create laboratory-clean conditions in the electronics plant. World-class products can only be manufactured if contamination, electrostatic charge and similar risks are excluded from the production area. It is therefore important to provide protective flooring and establish “clean-area” conditions required for SMD assembly.
Thanks to SMD technology, the system will operate with higher capacity and a negligible reject rate, generating significant savings in labour and materials. Further development will allow us to switch to our own off-grid energy system: solar panels charge the batteries, while our inverters convert the stored energy to AC and supply our production equipment.
We are building a demonstration model plant that can operate fully “green” and independently of the electricity grid. Such a concept could, for example, be deployed in developing regions wherever local production is needed. The plant will meet the most advanced energy-efficiency expectations and can even exceed them by using electricity generated by our own off-grid solar system in production. The products manufactured will also contribute to the green economy through their applications.
We are already active in the green economy, for example by manufacturing and selling charge controllers for solar systems, sine-wave inverters and other related products. The development will allow us to manufacture inverters and controllers cost-effectively, with quality competitive with modern products from well-known manufacturers such as Siemens, ABB and Conrad, while remaining price-competitive with Asian products.
Hungarian solar-panel manufacturers and installers will also be able to design and integrate high-quality domestically produced components into solar systems, contributing to higher productivity and greater domestic added value. With the new plant, our first goal is to further develop our inverter family to cover power ratings from 600 to 3,600 watts (600-1,200-2,400-3,600); currently we manufacture only up to 2,000 watts. Applications include solar systems, wells, off-grid buildings, motorhomes, houseboats and similar uses. On an annual basis, at least approximately
10,000 inverters and 10,000 programmable solar controllers. Based on energy-generation trends, national energy strategies and international agreements, as well as our decades of market experience and preliminary market research, we expect demand not only to absorb this output but potentially to exceed it.
Once stable supply chains have been established, we plan further capacity expansion in the medium term by reinvesting revenues. By building state-of-the-art technological capacity, our preliminary assessments indicate that we could serve the North American market at a share comparable to our current European business while continuing to strengthen our position in Hungary and Europe.
We plan annual revenue of HUF 300–400 million, which, with a 16% margin considered outstanding in the electronics industry, corresponds to a six-to-seven-year payback period. This can only be achieved with grant support. The development increases our total manufacturing capacity and efficiency, and therefore our competitiveness as well.
2018-1.1.2-KFI-2018-00181 – Development of a rotary-vane Stirling engine primarily for thermodynamic solar power plants
PROJECT TITLE: Development of a rotary-vane Stirling engine primarily for thermodynamic solar power plants
PROJECT ID: 2018-1.1.2-KFI-2018-00181
BENEFICIARY: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
Implementation location: 1163 Budapest, Cziráki u. 26-32.
CONTRACTED GRANT AMOUNT: 149 130 518 Ft
GRANT INTENSITY (%): 56,36 %
Project completed 2021.12.31.
TOTAL PROJECT COST: 264 592 594 Ft
INTERMEDIATE BODY: National Research, Development and Innovation Office
PROJECT DESCRIPTION:
Our company continuously explores opportunities for development and monitors market trends. Our successfully completed in-house technical R&D project represents a new scientific and engineering result in the design and application possibilities of Stirling engines. The innovation introduces a paradigm shift in engine design, and we have filed for patent protection for the intellectual property.
With the new design, a Stirling engine utilizing solar energy as a renewable source can achieve efficiency up to 10% higher than current solutions, while also making it possible to recover other concentrated sources of waste heat. LUXINFO Kft. supported implementation of the project as a consortium member.
GINOP-2.1.8-17-2017-00588 – Adaptive technological innovation at TRADEFLEX Ltd.
BENEFICIARY: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
IMPLEMENTATION LOCATION: 8600 Siófok, Csárdaréti út 3/B
CONTRACTED GRANT AMOUNT: 14 991 643 Ft
GRANT INTENSITY (%): 50 %
PROJECT COMPLETED: 2018.04.03
TOTAL PROJECT COST: 29 983 286 Ft
INTERMEDIATE BODY: Ministry for National Economy – Deputy State Secretariat responsible for Economic Development Programmes
PROJECT DESCRIPTION:
Research and innovation processes in SMEs (including voucher schemes, process innovation, design innovation, service innovation and social innovation); activities related to environmental protection and climate-change mitigation; mining and quarrying (including extraction of energy-producing materials); other unspecified services; other unspecified manufacturing; manufacture of food products and beverages; construction; fishing and aquaculture; human health activities; information and communication activities, including telecommunications, IT services, computer programming, consultancy and related activities; real estate, renting and business activities; public administration; agriculture and forestry; arts, entertainment, creative industries and recreation; wholesale and retail trade; not applicable; education; financial and insurance activities; transportation and storage; manufacture of transport equipment; manufacture of computers, electronic and optical products; social work, community, social and personal services; manufacture of textiles and textile products; tourism, accommodation and food-service activities; electricity, gas, steam, hot-water supply and air conditioning; non-repayable grant; water supply, sewerage, waste management and remediation activities.
GINOP-1.2.1-16-2017-00930 Expansion of production capacity at Tradeflex Kft.
BENEFICIARY: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
IMPLEMENTATION LOCATION: 8600 Siófok, Csárdaréti út 3/B
CONTRACTED GRANT AMOUNT: 73 226 344 Ft Ft
GRANT INTENSITY (%): 50 %
PROJECT COMPLETED: 2019.12.16
TOTAL PROJECT COST: 146 452 689 Ft
INTERMEDIATE BODY: Ministry for National Economy – Deputy State Secretariat responsible for Economic Development Programmes
PROJECT DESCRIPTION:
Our company continuously explores development opportunities and monitors market trends. A further milestone in our own engineering development is the experimental development of a cranial drilling device representing a significant innovation even on a global scale, and its transformation into a product suitable for series production.
As a next step in our development, for medical-technology devices we intend not only to participate in R&D and electronic design but also to enter the manufacturing process at an earlier stage by producing structures and units intended for electrical assembly and integration, such as medical instruments, bone drills and dispensers.
An important development objective is to establish ourselves in the market first as a supplier after production starts, and later to manufacture devices entirely of our own production. The medical devices in focus are typically made from medical-grade metals or plastics such as titanium, stainless steel, ceramics and PEEK, which require specialized CNC machining equipment.
Within this project, three such CNC machining machines will be purchased:
1 NSL-32AB CNC sliding-head lathe,
1 NTP-510 high-speed CNC machining centre
and 1 SONIX888 CRD-M washing system.
VEKOP-1.3.1-16 – Support for the market presence of micro, small and medium-sized enterprises
BENEFICIARY: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
IMPLEMENTATION LOCATION: 8600 Siófok, Csárdaréti út 3/B
CONTRACTED GRANT AMOUNT: 9 984 500 Ft
GRANT INTENSITY (%): 50 %
PROJECT COMPLETED: 2017.05.24
TOTAL PROJECT COST: 19 969 000 Ft
INTERMEDIATE BODY: Ministry for National Economy – Deputy State Secretariat responsible for Economic Development Programmes
PROJECT DESCRIPTION:
Our company, Tradeflex Kft., is a Hungarian-owned business operating since 1991. For six years the company sold Hungarian instrument-industry products in Western Europe, then established an electronics manufacturing plant where today nearly 40 specialists work in modern conditions, compared with 12 employees at the start.
Its activities include full-scale manufacture of electronic devices—from procurement of raw materials through packaging—as well as electronic and electromechanical assembly, wiring, measurement and testing, electronic product development, and contract manufacturing according to customer requirements.
Applications of the company’s products include systems utilizing solar and wind energy, power supplies for electrical equipment in motorhomes, charging and regeneration of vehicle batteries, and electronic scale-reduction systems for household water pipes. Tradeflex Kft. recorded net revenue of HUF 831.7 million in 2014, generated mainly from its core activity (TEÁOR 2790: Manufacture of other electrical equipment).
Exports accounted for 55.8% of net sales revenue, and the company generated HUF 464.6 million in revenue from third countries. A new development is a family of food-vending systems that makes a new range of products sellable through automated kiosks. This new and market-filling food-vending family enables access to entirely new markets. Depending on the model, the machines can store 100 to 300 portions of food from which customers can choose freely.
The machine continuously informs the operator about stock depletion and product expiry. It automatically monitors the internal temperature, maintained by ventilated cooling technology. A touchscreen enables fast and simple purchasing, while an electric lock protects the machine against unauthorized access. Available payment methods include coins, banknotes, bank cards and contactless PayPass.
(The latter two are available only on certain machine types.) The device also includes a remote-monitoring system, so the operator is immediately notified of potential faults. We see major potential in introducing this new product range to the market, including the possibility of achieving a leading position in a new market. We plan to launch and operate the food vending machines in Hungary through our subsidiary GastroFlex Kft.,
while in the strategically important German market—whose scale substantially exceeds our own operating capacity—we would work with local operating partners. We plan to select these partners on a territorial basis with exclusivity by federal state. Germany is an attractive launch market because of its size, European significance, trend-setting role in marketing and our company’s substantial experience there.
The vast majority of our export revenue also comes from Germany. Our company acquired a 51% majority stake in Cool Foods Kft., a supplier of ready meals required for operating the food-vending systems. Cool Foods Kft. was founded specifically to manufacture chilled ready meals and markets its high-quality products under the fritella® brand.
The purpose of this strategic vertical-integration step is to secure the diverse, high-quality ready-meal range essential to the market success of the vending machines. The two companies therefore plan close, long-term cooperation in bringing the machines to market, with Cool Foods Kft. able to supply the chilled ready meals sold through the machines not only domestically but also to our foreign partners.
Successfully introducing the food-vending systems to the German market will therefore not only support the development of TRADEFLEX Ltd. but, as a positive external effect, can also expand the market for Cool Foods Kft. products. To establish a reseller network in Germany, our company requested comprehensive proposals from three Hungarian companies. Of the offers received, we selected Révolte Solutions Kft.,
because its proposal combined the lowest implementation cost with the highest promised professional quality and guarantees regarding the results of the activities. The contractor will conduct market research on the German market for food and beverage vending systems and, based on the findings, establish the professional and conceptual foundations of the sales/operator system through marketing and business consulting.
During implementation, the contractor will create a sales and partner-acquisition system used to identify, filter, evaluate and engage potential partners. The sales “funnel” designed to find prospects and generate interest will be driven in an automated, proactive and interactive manner by a direct-marketing advertising campaign that provides information and promotional support, together with a foreign-language website.
Potential customers will enter the system through direct-marketing activities—personalized outreach, information and interviews—together with targeted, tracked and adapted online advertising campaigns on Facebook and Google Ads. To support information for prospective partners, the contractor will also produce five online product-presentation applications and five promotional videos.
After the candidates have been evaluated, suitable partners demonstrating a genuine willingness to cooperate will be invited to one of eight product demonstrations/business meetings in Germany. There they will meet TRADEFLEX Ltd. representatives in person, see the machines demonstrated in practice on the first day, and begin cooperation negotiations with the selected partner or partners.
The product demonstrations will take place in Munich, Stuttgart, Frankfurt, Leipzig, Hamburg, Essen, Hanover and Berlin. Further details on the planned activities are provided in the contractor’s detailed quotation. We plan to invite at least 40 qualified partner candidates to the business meetings and initiate negotiations with them.
To handle enquiries from the German market and develop our market presence in Germany, we appoint Regina Fekete as the person responsible for foreign trade. She has previously performed similar work at our company and has the required language skills, professional qualifications and experience. The foreign-trade role will be established under FEOR code 3622 “Commercial administrator” with the job title “Foreign trade administrator”, and the employee will be transferred to this position when the project begins.
The employee’s language-examination certificate and previous employment contract were attached to our grant application.
KFI_16-1-2016-0074 – Development of an innovative cranial drill motor and tools at Tradeflex Kft.
TRADEFLEX Kereskedelmi és Szolgáltató Kft. set out to develop a modern, innovative cranial drill motor and its tools under grant call KFI_16-1-2016-0074, “Support for companies’ R&D activities” (KFI_16).
The resulting development is a revolutionary new cranial drilling device consisting of a universal housing, single-use easily replaceable tools, a twin-turbine motor capsule and a measurement station for testing the device.
The innovative medical device developed introduces significant improvements over existing devices in three key areas:
- 1. Significantly quieter while delivering higher power,
- 2. Provides the surgeon with ergonomic options by allowing the housing shape to be adapted to the nature of the procedure,
- 3. The solution simplifies tool replacement.
Project completion: 31 January 2019
The project was implemented with a total cost of HUF 170,717,624, of which the funding authority provided HUF 87,483,812 in non-repayable support from the National Research, Development and Innovation Fund.
GINOP-1.3.1-14-2014-00099 – Support for Tradeflex Kft.’s market presence
BENEFICIARY: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
IMPLEMENTATION LOCATION: 8600 Siófok, Csárdaréti út 3/B
CONTRACTED GRANT AMOUNT: 7 433 850 Ft
GRANT INTENSITY (%): 50 %
PROJECT COMPLETED: 2015.05.14
TOTAL PROJECT COST: 14 867 700 Ft
INTERMEDIATE BODY: Ministry for National Economy – Deputy State Secretariat responsible for Economic Development Programmes
PROJECT DESCRIPTION:
The project aims to identify new market segments in four countries in connection with Tradeflex Kft.’s core activities. Product presentations were planned in Moscow, Kyiv and Bratislava between 1 February and 30 November 2015. These presentations were preceded by market research covering Russia, Ukraine, the Czech Republic and Slovakia to identify companies with activities similar to those of the applicant and assess the local market participants.
The market-entry support element of the grant provides for an interpreter at each product presentation to ensure effective communication. As part of the consultancy, the contracted company prepares marketing material and a commercial offer enabling Tradeflex Kft. to enter the relevant countries effectively and open new international markets. Three quotations were requested for each project element, of which the applicant accepted the quotation submitted by Creative Expert Consulting Kft.
GINOP-1.2.1-16-2017-00930 – Expansion of production capacity at Tradeflex Kft.
BENEFICIARY: TRADEFLEX Kereskedelmi és Szolgáltató Korlátolt Felelősségű Társaság
IMPLEMENTATION LOCATION: 8600 Siófok, Csárdaréti út 3/B
CONTRACTED GRANT AMOUNT: 73 226 344 Ft Ft
GRANT INTENSITY (%): 50 %
PROJECT COMPLETED: 2019.12.16
INTERMEDIATE BODY: Ministry for National Economy – Deputy State Secretariat responsible for Economic Development Programmes
PROJECT DESCRIPTION:
Project content: Our company has been manufacturing electronic equipment for decades. We continuously develop our product structure and, as a result, in recent years we have established a significant market position not only in electronics manufacturing but also in medical-instrument production. The equipment purchased under this project is related to this segment.
A public procurement procedure was conducted for all three items. As a result, in December 2019 one NSL-32Ab CNC sliding-head lathe with sub-spindle, one NTP high-speed CNC machining centre and one SONIX 888 CRD-M washing system were purchased from the successful suppliers and commissioned at the company’s Siófok site.
The equipment integrates seamlessly into the company’s machinery and production processes, delivering a significant increase in capacity and technological level because it represents current state-of-the-art technology.
Several employees received training in the professional use of the equipment. The modern manufacturing machines also improved working conditions. The project has made it possible to fulfil high-volume orders and has placed the company’s ability to retain jobs on a solid footing.
